The Peco Service And Meter Application form is designed for individuals or entities seeking to establish or modify electric service and meter configurations with PECO. This comprehensive document requires detailed information about the customer, site specifics, type of service, metering details, and construction status among other critical elements to ensure prompt and accurate processing. To simplify the process and avoid any delays, it is essential to follow the instructions meticulously and furnish all requested details. Ready to get started with your application? Click the button below to fill out the form.
The PECO Service And Meter Application form serves as a critical first step for customers seeking to initiate, modify, or terminate electric service. This comprehensive document requires applicants to provide detailed information spanning across multiple aspects, including but not limited to, personal identification, service location, billing address, construction status, and specifics about the electric load and meter requirements. It underscores the importance of precise and thorough completion to avoid any delays in processing, as highlighted in the form's instructions. Additionally, it sets out guidelines for electricians and contractors, specifying the need for a Tax Identification number and encouraging the inclusion of a desired reply date. The form elucidates on various service requests ranging from new installations, load adjustments, to demolitions, encapsulating different types of services like residential and commercial, and detailing service characteristics vital for accurate provisioning and metering. It intricately maps out requirements for the load characteristics, motor information, and if applicable, compensated metering needs, ensuring that the electric service aligns with the customer's demand and the premises' specifications. Notably, the application mandates compliance with PECO's Electric Service Requirements manual and necessitates an inspection by an approved agency, particularly for the City of Philadelphia requests, hinting at the procedural adherence to safety and regulatory standards. The form also delineates the process for customers who haven't had PECO service in the last 60 days, emphasizing the necessity of a credit application and agreement, while setting a communication deadline post-PECO's response to avoid cancellation. This introduction to the PECO Service And Meter Application gives an overview of its purpose, requirements, and the imperative of detailed attention for successful electric service provisioning or adjustment through PECO.
INSTRUCTIONS FOR PREPARING APPLICATIONS FOR ELECTRIC SERVICE & METER
Please refer to the sample application while reviewing the following notes. The letters below correspond with those on the sample. NOTE: THE "BLANK" FORM IS BELOW THE "SAMPLE" FORM
A.After reading the instructions at the top of the application, locate the PECO regional office in which the service is requested. Check the appropriate box and mail or fax the completed application to the appropriate regional office.
B.Complete the fields for customer's name and service location. Customer's Driver's License Number or Social Security Number is now required.
Note: (*) Include PECO Energy pole # and/or Lot # only if applicable.
(**) Use the address of the service when applying for underwriter's inspection.
C.Complete the fields for customer's PECO billing address or account number (within last 60 days).
D.Complete fields regarding you as the electrician or contractor, and indicate where you would like the reply sent. The Electrician/Builder Tax Identification number is now required. Also, please include the date you would like the reply returned to you.
E.Indicate your current construction status, and include the date PECO service is requested. Please avoid using "as soon as possible".
F. thru J. Indicate the following:
•Type of Request
•Type of Service (include number of units and area per unit)
•Service Characteristics
•Meter Information
•Heating/Air Conditioning
K.Complete the table concerning the load characteristics of the service. For each applicable type of load, provide: 1) Connected KW, 2) Maximum Summer KW Demand, and 3) Maximum Winter KW Demand.
L.Complete the table concerning motor information.
M.If compensated metering will be used, indicate totalizer and general load (KW).
N.Include any additional comments.
O.
Application MUST be signed and dated.
Forms Rev. 5/18
PECO
Application for Electric Service & Meter
M-24175 (front) Rev. 5/18
INSTRUCTIONS:
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency. (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring, information regarding service availability and meter location should be obtained from the company.
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL 8-1-1 (PA ONE CALL) FOR DEMOLITION REQUEST
NEW BUSINESS SERVICES (1-800-454-4100) http://www.peco.com
PHILADELPHIA
DELAWARE & CHESTER COUNTIES
BUCKS & MONTGOMERY
NEW RESIDENTIAL
COUNTY
1050 W. Swedesford Rd.
COUNTIES
CONSTRUCTION
A
830 S. Schuylkill Ave.
Berwyn, PA 19312
400 Park Ave.
(All Counties)
Philadelphia, PA 19146
Email:DelChesterServiceApplications@ex
Warminster, PA 18974
Email:PhilaNewBusiness@e
eloncorp.com
Email:Bucksmontserviceapplications@e
Warminster, PA
18974
xeloncorp.com
Fax # (610) 725-1416
Email:NRCGMETERORDERS@P
Fax # (215) 731-2327
Fax # (215) 956-3240
eco-Energy.com
Fax # (215) 956-3380
CUSTOMER NAME
Tax ID # or SSN
TYPE OF REQUEST
New Service
Load Increase/Decrease
Reintroduction of Service
Temporary Service
Upgrade/Changes
Demolition (Remove
Separation of Wiring
Service Relocation
Service)
** ADDRESS TO BE SERVED
B
APARTMENT/LOT #
F
Make-Safe (De-
energize/Cover)
CITY, STATE
ZIP CODE
TYPE OF SERVICE: Please include site plan.
RESIDENTIAL
COMMERICAL
Single House
Mobile Home
Store
Office
G
Apartment
Modular Home
Industrial
Warehouse
UTILITY POLE#
SUBDIVISION/DEVELOPMENT
TOWNSHIP/MUNICIPALITY/WARD#
Duplex
Town House
Restaurant
Other _____________________________
Area of Building _______________________ Sq. Ft.
* If Applicable
SERVICE CHARACTERISTICS:
** Please use this address when applying for underwriter’s inspection
PHASE
VOLTS
WIRES
Underground
Aerial
CUSTOMERS BILLING ADDRESS
C
-OR-
PECO ENERGY ACCOUNT#
3
240
AMPS _________
120/240
4
120/208
TELE. #
1
120
2
277/480
13200
3 or 4
SEND REPLY TO:
5
33000
ELECTRICIAN’S OR BUILDER’S NAME
METER INFO:
Two Meters, Commercial (General/Totalizer)
I
Single Meter Required
Multiple Meter Total No. _____________
ADDRESS
Reply Requested by:
HEATING/AIR CONDITIONING:
D
/
Central Air _____ Tons
Resistance
J
Heat Pump _____ Tons
Natural Gas
Propane
Type Back-Up _________
Other ________________
City, State
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:
CONNECTED
PECO ENERGY USE ONLY (DEMAND)
TYPE
LOAD (kW)
E-MAIL ADDRESS
SUMMER (kW)
Winter (kW)
LIGHTING
K
CURRENT CONSUTRCTION STATUS:
HEATING
Not Started – Date Customer Will Start Work: _____/_____/_____
In Progress Completed
AIR/COND.
Approximate Date Service Requested: _____/_____/_____
E
TANKLESS WATER HTR
MISC
CUSTOMER COMMENTS/ DESCRIPTIN OF WORK
N
TOTAL
Include single line diagram and substation arrangement if appropriate.
LARGEST MOTOR SPECIFICATIONS
O
QUANTITY
TOTALIZER LOAD
SIZE (HP)
L
M
LOCKED ROTOR CURRENT
KW
MOTOR CODE LETTER
SUBMITTED BY: _________________________________ DATE: ______________________
GENERAL LOAD
VOLTAGE
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
PURPOSE
INFORMATION BELOW WILL BE FILLED IN BY PECO:
Service Request No.
BUS/MAJ ACCT REP
TELEPHONE
DATA RECEIVED
DESIGNER
POL SUB
RATE
RIDER
CONTRACT LIMITS
SIC NUMBER
T
DATE REPLY
NUMBER
COMPLETED
AMPS
CIRCUIT
C-QUAD
T-QUAD
LOAD (KVA)
SUMMER_____WINTER ____
SERVICE CHARACTERISITICS – Select One from Each
POLE # / MH # LOCATION
CUT THROUGH DATE
SERVICE TYPE
URD
RATE:
Residential
Comm (Non-
Comm (Demand)
HT/PD
Demand)
GENERATION PROCUREMENT CLASS:
Class 1 (Residential)
Class 2 (Commercial, less than 100kW)
Class 3 (Commercial, 100kW to 500kW)
Class 4 (Commercial, greater than 500kW)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load
estimates for the first year of service. The customer’s Procurement Class will be adjusted each year,
based on actual usage.
METER TYPE:
KWH
IND. DEMAND
RECORDER
TOU
SERVICE PHASING:
SINGLE PHASE
TWO PHASE
THREE PHASE
SERVICE REQUIREMENTS:
METERING LOCATION AND REQUIREMENTS:
Present Location:
Meter # _______________
CTs-
PTs-________
Present Service OK
Loop Only
________
Taps Only
See Job # ________________________________
Indoo
Outdoor
On ________ Wall, ________ Ft. From ________ Wall, ________ ft. Above
r
Ground
ADVANCE NOTIFICATIONS:
CUSTOMER BILLING:
Underwriter’s Cert.
Yes
No
Advance Billing
$_______________
Required
__
Customer to Trench
No Customer
Permit Required
State
Other
Charges:
_______________________
Cust. #
Date
ACT 222 Cert. Required
Yes #
N/A
_________________________
___________________________
_____________
BTCO #
PA One Call #
________________________
__________________________
CATV #
Gas
BTCO
CATV
___________________
Other
SKETCH / INSTRUCTIONS
PHILADELPHIA COUNTY
Email:PhilaNewBusiness@ex
Email:DelChesterServiceApplications@exe
loncorp.com
*
If Applicable
**
Please use this address when applying for underwriter’s inspection
E-MAIL ADDRESS #
Not Started – Date Customer Will Start Work: _____/_____/_____ In Progress Completed
CUSTOMER COMMENTS/ DESCIPTION OF WORK:
T NUMBER
SUMMER_____WINTER
____
Comm (Non-Demand)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load estimates for
the first year of service. The customer’s Procurement Class will be adjusted each year, based on actual usage.
CTs- ________
Indoor Outdoor
On ________
Wall, ________ Ft. From ________ Wall, ________ ft. Above Ground
See Job # _________________________________
Underwriter’s Cert. Required
Advance Billing Required Yes
$_________________
No Customer Charges: $_________________
Other _______________________
Cust. # _________________________
Date ___________________________
Yes # _____________
BTCO # ________________________
PA One Call # ___________________________
Date __________________________
CATV # ________________________
Other ___________________
Other __________________________
Filling out the PECO Service And Meter Application form is a straightforward process aimed at connecting your property to electric service. This task involves providing detailed information about the customer, the requested service, and the technical specifications related to the electric service and meter setup. Accurate and complete submissions are essential for ensuring your application is processed efficiently and without unnecessary delays. Following a step-by-step list will guide you through each part of the application to ensure all necessary details are included.
After submitting the PECO Service And Meter Application, your request will be processed in accordance with PECO's policies. Complete and accurate application information helps expedite service activation. For specific inquiries or updates regarding your application, use the contact details provided for the PECO regional office where your application was submitted. Remember, if your property is undergoing demolition and requires removal of electric or gas facilities, contact 8-1-1 for a demolition request as noted in the form instructions.
To properly submit the PECO Service and Meter Application form, you'll need to fill out multiple sections with various pieces of information. These include:
It is crucial to provide accurate and comprehensive details in each section to avoid delays in processing your application.
Once you have completed the form, you can send it to the PECO Regional Office that corresponds with the location of the service requested. The application can be mailed or faxed. You will find the contact information, including the mailing address and fax number, for each regional office listed in the instructions of the application form.
Yes, including a site plan with your application is necessary. The site plan provides PECO with essential details about the physical layout and specifications of your service location, which is critical for assessing your service needs accurately.
Submitting incomplete information can significantly delay the processing of your application. PECO requires comprehensive details to evaluate and fulfill your service request efficiently. If incomplete information is submitted, PECO may reach out to you for additional details, which can extend the time frame for getting your service established or modified.
Yes, the application form must be signed and dated by either the customer or their authorized representative. A signature is essential as it verifies the accuracy of the information provided and signifies agreement with PECO's terms for service establishment or modification.
If you need PECO to remove electric or gas facilities as part of a demolition project, you are required to call 8-1-1 for a Pennsylvania One Call demolition request. This is a necessary step to ensure the safe removal of utilities in compliance with state regulations and to avoid any potential hazards.
Not checking the box for the appropriate PECO regional office: It's vital to direct your application correctly to facilitate timely processing. This initial step ensures your application gets to the right hands without unnecessary delay.
Leaving customer information fields incomplete: Including your name and the service location is crucial. Remember, providing your Driver's License Number or Social Security Number is now a requirement, not an optional step.
Forgetting to include the PECO Energy account number or billing address: If you've had PECO service in the last 60 days, your account number or billing address must be included. This information is key to cross-referencing your application with existing records.
Omitting the Electrician/Builder Tax Identification number: This is a common slip. The Electrician/Builder's Tax ID not only verifies the electrician or builder's legitimacy but also helps in maintaining accurate records of who is performing the work.
Vagueness in indicating the construction status and service request date: Stating your construction status and when you'd like the service to begin helps PECO schedule your request efficiently. Avoid using ambiguous terms like "as soon as possible."
Skipping details under service characteristics and meter information: These sections guide PECO in understanding your power needs and how to best configure your service. Providing clear and accurate information here can prevent future issues with service delivery.
Failure to sign and date the application: This might seem basic, but it's a significant oversight. An unsigned application can't be processed, as it lacks your confirmation of the provided information's accuracy and your agreement to proceed.
Filling out the application correctly the first time around can significantly expedite your service request. Take the time to review each section carefully, ensuring that no details are missed. If you're unsure about any of the instructions, don't hesitate to reach out to PECO directly for clarification. This proactive approach not only saves you time but also helps avoid any unnecessary back-and-forth.
When handling the PECO Service And Meter Application form, several other forms and documents often come into play, each serving a unique purpose in ensuring a smooth process for obtaining electrical service. Below is a summary of these additional forms and documents.
Each document contributes to a comprehensive understanding of the project's scope and requirements, thereby facilitating accurate and efficient service installation and operation. Whether you are a homeowner, contractor, or developer, ensuring you have these documents in order will ease the process of applying for electric service and meter installation with PECO.
Utility Connection Application Forms: These forms are used by individuals or businesses to request new utility services or change existing services, much like the PECO Service And Meter Application. They require similar information such as the customer's details, service location, and the specific utility needs. Both applications serve as the initial step in establishing service connectivity, detailing the requirements for both the utility provider and the customer to ensure a smooth installation and service provision process.
Building Permit Applications: Similar to the PECO form, building permit applications are necessary for new constructions or renovations that alter a building's structure or systems, including electrical upgrades. These applications often require detailed plans of the project, the contractor's information, and specifications of the work to be done, which mirrors the PECO application's need for specific electrical service details, load characteristics, and metering information.
Electrical Inspection Requests: These documents are required to ensure that electrical work complies with safety regulations and building codes, resembling the section of the PECO application that asks for an underwriter's inspection. Both documents are crucial for the safety and compliance of electrical installations, with a focus on preventing hazards related to faulty electrical work.
Credit Application Forms for Utilities: Such forms are filled out to assess the creditworthiness of a customer seeking to establish a new utility service if they haven't had service within a certain period, similar to the credit application process mentioned in the PECO form. These documents collect personal and financial information to ensure the customer can fulfill their payment obligations for the utility service being provided.
When completing the PECO Service and Meter Application form, there are important steps to follow and pitfalls to avoid. Below is an organized list of dos and don'ts to help ensure a smooth application process:
By adhering to these guidelines, applicants can enhance the likelihood of a seamless application process, minimizing delays and ensuring that all necessary details are accurately conveyed to PECO.
When dealing with the PECO Service and Meter Application form, various misconceptions can arise, leading to confusion and potentially delaying the process of obtaining electric service. Let’s debunk some of these misunderstandings for clarity’s sake.
Many assume they only need to fill out sections pertinent to their specific request. However, the form requires comprehensive information across all sections to ensure PECO accurately processes the application. Skipping sections might result in processing delays.
Contrary to some beliefs, providing a Social Security Number or Driver's License Number is mandatory. This requirement helps in verifying identity and expediting the service process.
While it’s tempting to expect immediate service setup, indicating a preference for "as soon as possible" is discouraged. A specific date allows PECO to schedule and plan the service connection more efficiently.
Completing and submitting the form is just the first step. The application must undergo a review process, including site inspection and compliance with PECO's Electric Service Requirements. Thus, approval might not be as instantaneous as some might hope.
Service requests can vary significantly – from new installations to service upgrades or relocations. Each type demands specific information and documentation. The application is designed to cater to this diversity, and understanding the nature of your request is crucial for submitting the right information.
A common oversight is the failure to sign and date the application. Signatures are essential for validating the request. An unsigned application might be considered incomplete and could be returned or delayed.
Addressing these misconceptions and approaching the PECO Service and Meter Application with accurate information and expectations can lead to a smoother, quicker service commencement. Always read the instructions carefully and provide complete, correct details to facilitate the process.
Filling out and using the PECO Service and Meter Application form requires careful attention to detail and an understanding of your specific needs. Here are key takeaways to ensure your application is complete and processed without delays:
Before submitting the application, ensure you have consulted with PECO regarding service availability and meter location to avoid any unnecessary issues with your service request. Also, be aware that a credit application and agreement must be filled out if the customer has not had PECO service within the last 60 days. Finally, know that PECO has a 90-day communication policy which means the company reserves the right to cancel the request if no further communication is received within this timeframe.
Transfer Tax in Nj - Real estate transactions in New Jersey cannot be finalized without this affidavit, which guarantees transparency in the property's sale price for tax calculation.
Army New Counseling Form - Completion of the DA 4856 form is a step in the process of developing a constructive plan of action for an individual soldier's improvement and success.